1. Wear personal protective equipment properly. What should be worn must be worn, and what should not be worn must not be worn. For example, a female worker is required to wear a protective cap during paper tube machining. If she does not wear it, she may twist her hair. At the same time, gloves must not be worn. If they are worn, the rotating part of the paper tube machine may twist the gloves in and hurt hands.
2. The paper tube machinery and equipment must also undergo safety inspection in accordance with regulations during operation. In particular, check the tightened item for looseness due to vibration to re-tighten it.
3. Before the operation, the paper tube machinery and equipment must be inspected for safety, and run empty. After confirming that it is normal, it can be put into operation. 4. It is strictly forbidden to operate the equipment with faults. Do not make use of it to prevent accidents.

5. When the paper tube machinery is in operation, it is strictly forbidden to adjust by hand; nor shall it be used to measure parts by hand, or to lubricate and clean up debris. If it is necessary, the machinery and equipment should be shut down first.

6. The knives, jigs, and processed parts used in paper tube machinery must be installed firmly and must not be loose.
7. The mechanical safety device must be used correctly according to the regulations, and it must never be removed and not used.
8. When the paper tube machinery is running, the operator must not leave the work post to prevent unattended disposal when problems occur.
9. After the work is completed, the switch should be closed, the tools and workpieces should be withdrawn from the working position, and the work site should be cleaned up. The parts and fixtures should be neatly arranged to clean the paper tube machinery and equipment.