>>>> Click to watch video <<<<
 |
 |
|
Cutter table1 |
Cutter table2 |
Function description:
1. The host has 8 sets of 10 sets / 12 sets of angle-preventing forming rollers that rotate coaxially and adjust the upper pressing wheels pneumatically.
2, 5 groups of cardboard forming rollers; 8 groups of U forming rollers.
3. Mitsubishi inverter, Mitsubishi servo motor, Mitsubishi touch screen, Mitsubishi PLC man-machine interface. Simple operation and easy to learn.
4. The production operation is fully digitalized, and the production specifications are input into the touch screen in batches, the production quantity is monitored, and the machine is automatically shut down after completion.
5. Automatic alarm, fault prompt and convenient maintenance.
6. Punching and creasing device can be installed on the corner protection production line, which can punch corners with a side width of 30 ~ 80mm. 90-degree punch, 90-degree buckle punch, 5 ~ 90 degree surround punch are commonly used).
7. According to customer requirements, the three functions of paper corner protection V, cardboard I and corner protection U can be combined on one production line.
The main technical parameters:
|
Number of V corner protectors and U corner protectors |
8 Group |
|
Cardboard forming rollers |
5 Group |
|
V, U corner protection, cardboard production speed |
45M/ min |
|
Corner protection wide range |
30-100MM |
|
V, U corner protection, cardboard thickness range |
2-5MM |
|
Cardboard width range |
30-220mm |
|
U-shaped edge width / slot width |
C1/C2:30-80MM/B:30-230MM |
|
Corner speed with punch |
0-30M/min |
|
Corner width with punch |
30-80mm |
|
Corner punch thickness |
3-5mm |
|
Paper layers |
3-13 |
|
All-inclusive |
30-65mm |
|
Paper width |
330mm |
|
Cutter method |
CNC single-pole |
|
Punching function |
Optional |
|
Glue rack |
13 Floor |
|
Paper rack |
The standard configuration is a cross paper tray (highly available with a pneumatic paper tray) |
|
Printing function |
Optional |
|
Input voltage |
380 （3P) |
Electrical control configuration
|
Monitor rate |
5.5-7.5KW |
|
Inverter |
Mitsubishi |
|
PLC controller |
Mitsubishi |
|
touch screen |
Mitsubishi |
|
servo motor |
Mitsubishi |
